- Home >
- Cavallo Hoof Boots >
- Cavallo 'CLB BLING' Mini Hoof Boots - Pair
SLIM FIT!
If you are looking for hoof protection for your mini horse or pony, Cute Little Boots Minis are the boots for you!
The CLB upper is heavy duty industrial grade and durable with a soft foam collar and breathable backing for your equine’s comfort. Includes reflective logos for safety and a supple and flexible bulb. The boot goes on easily, conforms to individual hoofs and pasterns, and it stays on. Each boot can fit a left or right foot or be used on the rear hooves.
**The new size M1 is made to fit the smallest of miniature horses, and the M4 is sized to fit a large miniature horse or pony or very small regular horse hoof. The M4 is also offered to “bridge the gap” between Cavallo’s miniature and regular size ranges. The M1 – M4 size range now gives a complete range of sizing, covering the small hoofs that could previously not fit a Cavallo Boot!**
SOLD IN PAIRS
Upper Features:
- Soft Foam Collar
- Durable confetti which will not come off!
- Replaceable Velcro Closure System
- Reflective logos for safety
- Patented front opening upper system
- Cavallo signature built in side drainage slots
- Heavy duty industrial grade 1680 Denier Nylon Upper
Unique Outsole
- Outside tread pattern supports the hoof wall
- All-terrain tread minimizes build-up of mud, sand and debris
- Excellent traction while still allowing natural movement
- Center of the outsole is recessed to minimize pressure
- Built-in sole relief: Raised inner rim takes the pressure off sole, bars and frog
Sizing guide
1 ) Measure the hoof carefully just AFTER A FRESH TRIM.
2) Measure the length from the heel buttress line to the toe. Do NOT include heel bulbs.
3) Measure right across the widest part of each hoof.
4) Compare your measurements to Cavallo sizing chart within the link below. Stay within the boot size range as room for growth has already been allowed for between regular trims. The Cavallo Regular sole is best for a hoof that is measuring the same length and width. The Slim sole is 1/4 inch (6 mm) narrower than long and better suited to a more oval-shaped hoof.
Size M1:
Hoof Length: 2 3/8' - 2 11/16' (62mm - 71mm)
Hoof Width: 2' - 2 5/16' (51mm - 61mm)
Size M2:
Hoof Length: 2 3/4”-3 1/8” (72mm – 82mm)
Hoof Width: 2 3/8”- 2 3/4” (62mm – 72mm)
Size M3:
Hoof Length: 3 3/16″ – 3 5/8″ (83mm – 92 mm)
Hoof Width: 2 13/16″ – 3 1/8″ (73mm – 82 mm)
Size M4:
Hoof Length: 3 11/16″ – 4″ (93mm – 102 mm)
Hoof Width: 3 3/16″ – 3 5/8″ (83mm – 92 mm)
Barefoot Horse Riding
Many of us are happy to allow our horses to ‘go barefoot’. We see the benefits of a more natural program. We don’t like pounding nails into the hoof every 6 weeks. Shoeing is expensive and good farriers are hard to find. If we consider pulling the shoes, our horses may seem sore. Maybe you have even tried it and ended up putting the shoes back on.There are many factors that contribute to the long-term success of a barefoot program and it is very different than traditional shoeing. When a farrier comes, he trims your horse flat and level, even and balanced. He removes some dead tissue and makes the hoof look neat and tidy. His job is to make sure the shoe goes on securely and shapes to the trim he’s done, leaving the metal shoe as the only part making contact with the ground. Do you think this metal shoe absorbs the shock and concussion of 1000 pounds in motion? Do you think that the hoof is functioning as it should? Do you think blood is circulating freely? The answers are – not a chance!
Barefoot Horse – Trims
Let’s talk about what happens when we don’t put the shoes on. Proportionately, as a truly miraculous structure the small hoof supports the weight of a large horse. The walls expand and widen apart to draw the sole flat. When the sole levels downward towards the ground the bone column can easily move down. The coffin bone acts as a trampoline to absorb the descending structure. The frogs help the heels expand and in so doing, blood circulates freely carrying nutrients to the entire apparatus. Shock is absorbed properly. Tissue is nourished and the whole horse benefits because his most primary survival flight mode is not compromised through an archaic and unnecessary practice, which not only renders hoof function non-existent but exerts upward pressure to the entire internal structure.To achieve what we call proper hoof mechanism, some of your considerations should be:
- Frequent barefoot trims tailored for your horse
- Adequate movement & exercise
- Proper hoof hydration
- Counter effect of hard ground
- Stimulation of aggressive terrain
- Normal herd life with friends and socialization
Sole Features:
- Built-in break over
- Surefooted low-profile sole
- Unique tread pattern supports frog
- Innovative sole design for natural heel (skid) break
- Specially formulated high performance thermo plastic urethane (TPU) compound provides total hoof protection, shock absorption and abrasion resistance
- Built-in sole relief: Integrated high density inner rim supports load-bearing hoof wall, relieving minimum pressure off sole, bars and frog
- Built-in drainage for water, mud and sand
- Moulded in back flap for bulb protection and abrasion resistance
- Rust proof metal and waterproof thread
The Boot Warehouse has a 30-day return policy. To create a new return, begin by calling us on 02 9524 6188 and request a pre-paid return label. This will cost $16.95 per pair and can be paid over the phone.
The payment of $16.95 covers the cost of the postage of your item back to our warehouse and the cost of your new item back out to you or a refund in full. This saves you from having to pay general public postage rates to return your item. You will then receive your label via email to print and attach to your return. Cost for NZ customers is $20.00
To complete your return please follow the following steps:
1. Phone us on 02 9524 6188 and request a pre-paid label and pay the $16.95 over the phone. You will then receive your label via email shortly after.
2. Print the returns form or use the one included with your delivery and include it in the box - Click to print the RETURNS FORM
3. Ensure your item for return is in their original box which is packed back into a satchel to protect the box and item on its return
4. Print and attach the pre-paid label onto the satchel
5. Drop the parcel off to your nearest Australia Post office
6. Keep an eye on your e-mails for return updates
Important
Please ensure your item for return is in their original box which is packed back into a satchel to protect the box and item on its return. This is an important step as we need to re-sell the style you are returning. If you do not complete this step, we are unable to accept and process your return.
If you paid by Pay Pal, they offer to a partial refund of the return cost. For instructions on how to take advantage please click here.
Your parcel will take up to 4 days to be delivered back to our warehouse. If you have completed each of the above steps your return will be processed, dispatched or refunded if requested on the same day it is received here in the warehouse.
Have any further Questions?
Please email us at returns@tbwsafety.com.au or phone us on 02 9524 6188
International returns (excluding NZ):
All postage and handling costs will be incurred by the customer. If you return your item for a change of size, you must pay for the re-postage of your new item. The re-postage cost will be the same as what you originally paid and can be found on your invoice. If you are returning your item for a refund, please know you will be refunded the cost of your item only, excluding any postage originally paid. Please CLICK HERE to print a copy of our international (excluding NZ) return form.
CLAIMS FOR MANUFACTURER FAULTS
All of the footwear we sell is new to stock and covered by the manufactures 6-month warranty. If you find yourself in the unfortunate situation of needing to make a claim for a quality issue please follow these steps;
1. Check your item is still within its warranty time frame of 6 months.
2. Contact our warranty department via email: warranty@tbwsafety.com.au with your order number, a description and 2 clear images of the fault. If any further information or images are required, we will let you know via email reply.
3. We will confirm we have received your email and advise you of the outcome. In some cases, we will forward the images onto the manufacturer for their advice.
If the manufacturer agrees that your boot contains a manufacturing fault, we will issue you with a new pair straight away at our cost and provide you with a returns label which is pre-paid to return your faulty footwear.
In some cases, the boot will be required to be returned for further inspection before a decision can be made. Our returns department will advise you if this is required. Under no circumstances will we replace a faulty item with a size change. WARRANTY RETURNS FORM
30 DAY COMFORT GUARANTEE
To return a pair under a comfort guarantee, please follow the following steps. Please note, your item will need to be returned at your own cost.
1) The brand's that offer a 30 day comfort guarantee are Oliver, Blundstone and Steel Blue.
2) Your purchase must be returned within 30 days from date on receipt
3) Please include your receipt and a completed copy of the 30 DAY COMFORT GUARANTEE FORM
4) Return the package to the following address at your own cost
The Boot Warehouse
Unit 20, 20-28 Kareen Rd
Miranda NSW 2228
Under no circumstances will we replace a 30 day comfort guarantee return for a change of size. On most cases a refund will be offered or change of style can be discussed as an option.
You have no items in your shopping cart.
You have no items to compare.