Oliver Pull-On Firefighter Boots

Structural firefighter boot. Water resistant and flame retardant leather. Australian ‘3m’ flame resistant high visibility reflective tape. Wide profile ‘natureform’ type 1 non-metallic composite toe cap. Qflex zero non-metallic penetration protection insole. Electrical hazard (eh) protection. Reduces danger of accidental contact with live electrical circuits in accordance with astm f2413-05. Heavy duty dual density nitrile rubber sole. Heat resistant to 300ºcelsius. resists exposure to most acids and chemicals. Poronï® xrdï™ – extreme ankle protection. Comfort cushion pu/poron impact absorption system – reduces leg and lower back fatigue. Fully lined with sympatex waterproof liner and membrane. Heavy duty nomex stitching and flame proof laces. Tectuff toe bumper protection SIZES: 3 to 15 (half 6.5 to 10.5) AUS

 

Product Features

–  COMFORTcushion PU/PORON Impact Absorption System – reduces leg and lower back fatigue

–  Heat Resistant and Flame Retardant Full Grain Leather

–  Fully Lined with SYMPATEX Waterproof Liner and Membrane

–  Meets AS/NZS4821 Firefighting Footwear Standard

–  Water Resistant and Flame Retardant Leather

–  Australian ‘3M’ Flame Resistant High Visibility Reflective Tape.

–  Wide Profile NATUREform Type 1 Non-Metallic Composite Toe Cap

–  PORON® XRD™ EXTREME IMPACT PROTECTION Metatarsal Guard

–  QFlex Zero Non-Metallic Penetration Protection Insole -Heavy Duty Dual Density Nitrile Rubber Sole, Heat resistant to 300ºCelsius, resists exposure to most acids and chemicals

 

Sizes available:        5 – 15, including half sizes 

 

GET YOUR SIZE RIGHT!

The Sizing On These Oliver Boots Is UK Men’s (AU/UK Sizing)

PLEASE SEE THE SIZING SECTION FOR US & EU COMPARISONS

 

The Boot Warehouse is an authorised distributor of Oliver Boots. All Oliver Safety Boots are manufactured to Australian Safety Standards (AS/NZS 2210.3:2009), and Oliver offer extensive manufacturer warranty on all their footwear. We are happy to exchange and refund where applicable to ensure your satisfaction. See our ‘Returns & Exchanges’ section for additional information.

The Boot Warehouse has a 30-day return policy.  
To create a new return, begin by calling us on 02 9524 6188 and request a pre-paid return label. This will cost $16.95 or $20 for two pairs and can be paid over the phone. You can also request a return by emailing admin@tbwsafety.com.au. We will reply with a PayPal link in which you can deposit the amount for your return.

This payment covers the cost of the postage of your item back to our warehouse and the cost of your new item back out to you or a refund in full. This saves you from having to pay general public postage rates to return your item. You will then receive your label via email to print and attach to your return. The cost of returning a pair from New Zealand is $30.00.

To complete your return please follow the following steps:

1. Have your order number handy and phone us on 02 9524 6188 and request a pre-paid label and pay the $16.95 over the phone. You will then receive your label via email shortly after.
2. Print the returns form or use the one included with your delivery and include it in the box – Click to print the RETURNS FORM
3. Ensure your item for return is in its original box which is packed back into a satchel to protect the box and item on its return
4. Print and attach the pre-paid label onto the satchel
5. Drop the parcel off to your nearest Australia Post office
6. Keep an eye on your e-mails for return updates

Important 

Please ensure your item for return is in its original box or be sure that the original tags on the clothing have not been removed from your clothing. Your return will also only be accepted if you place your return back into the reusable satchel your item arrived in or any packaging, for example, wrapping paper or newspaper. Ensure that your return label is then placed onto the packaging and not directly onto the shoebox. This is an important step as we need to re-sell the style you are returning. If you do not complete this step, we are unable to accept and process your return.

If you paid by Pay Pal, they offer a partial refund of the return cost. For instructions on how to take advantage please click here.

Your parcel will take up to 4 days to be delivered back to our warehouse. If you have completed each of the above steps your return will be processed, dispatched or refunded if requested on the same day it is received here in the warehouse.

Have any further questions? 
Please email us at returns@tbwsafety.com.au or phone us on 02 9524 6188

International returns (excluding NZ):
All postage and handling costs will be incurred by the customer. If you return your item for a change of size, you must pay for the re-postage of your new item. The re-postage cost will be the same as what you originally paid and can be found on your invoice. If you are returning your item for a refund, please know you will be refunded the cost of your item only, excluding any postage originally paid. Please CLICK HERE to print a copy of our international (excluding NZ) return form.   

CLAIMS FOR MANUFACTURER FAULTS

All of the footwear we sell is new to stock and covered by the manufactures 6-month warranty. If you find yourself in the unfortunate situation of needing to make a claim for a quality issue please follow these steps;

1. Check your item is still within its warranty time frame of 6 months. 
2. Email our warranty department at returns@tbwsafety.com.au with your order number, a description, and 2 clear images of the fault. If any further information or images are required, we will let you know via reply.
3. We will confirm we have received your email and advise you of the outcome. We will sometimes forward the images to the manufacturer for their advice. 

If the manufacturer agrees that your boot contains a manufacturing fault, we will issue you with a new pair straight away at our cost and provide you with a returns label which is pre-paid to return your faulty footwear. 

In some cases, the boot will be required to be returned for further inspection before a decision can be made. Our returns department will advise you if this is required. Under no circumstances will we replace a faulty item with a size change. WARRANTY RETURNS FORM

30-DAY COMFORT GUARANTEE

To return a pair under a comfort guarantee, please follow the following steps. Please note, your item will need to be returned at your own cost.

1) The brands that offer a 30-day comfort guarantee are Oliver, Blundstone and Steel Blue.
2) Your purchase must be returned within 30 days from the date of receipt
3) Please include your receipt and a completed copy of the 30 DAY COMFORT GUARANTEE FORM
4) Return the package to the following address at your own cost

The Boot Warehouse 
Unit 20, 20-28 Kareena Rd 
Miranda NSW 2228

Under no circumstances will we replace a 30-day comfort guarantee return for a change of size. In most cases, a refund will be offered, or a change of style can be discussed as an option.

PRE ORDER ITEMS

The Boot Warehouse does not accept returns on pre-order items. 
Customers should only purchase this item if they have previously owned a pair and know their size.

Oliver 66496 Pull On Structural Firefighter Boots. Water Proof. Flame Retardant

Cotton Socks
$407.95
Clear
Compare

Oliver Pull-On Firefighter Boots

Structural firefighter boot. Water resistant and flame retardant leather. Australian ‘3m’ flame resistant high visibility reflective tape. Wide profile ‘natureform’ type 1 non-metallic composite toe cap. Qflex zero non-metallic penetration protection insole. Electrical hazard (eh) protection. Reduces danger of accidental contact with live electrical circuits in accordance with astm f2413-05. Heavy duty dual density nitrile rubber sole. Heat resistant to 300ºcelsius. resists exposure to most acids and chemicals. Poronï® xrdï™ – extreme ankle protection. Comfort cushion pu/poron impact absorption system – reduces leg and lower back fatigue. Fully lined with sympatex waterproof liner and membrane. Heavy duty nomex stitching and flame proof laces. Tectuff toe bumper protection SIZES: 3 to 15 (half 6.5 to 10.5) AUS

 

Product Features

–  COMFORTcushion PU/PORON Impact Absorption System – reduces leg and lower back fatigue

–  Heat Resistant and Flame Retardant Full Grain Leather

–  Fully Lined with SYMPATEX Waterproof Liner and Membrane

–  Meets AS/NZS4821 Firefighting Footwear Standard

–  Water Resistant and Flame Retardant Leather

–  Australian ‘3M’ Flame Resistant High Visibility Reflective Tape.

–  Wide Profile NATUREform Type 1 Non-Metallic Composite Toe Cap

–  PORON® XRD™ EXTREME IMPACT PROTECTION Metatarsal Guard

–  QFlex Zero Non-Metallic Penetration Protection Insole -Heavy Duty Dual Density Nitrile Rubber Sole, Heat resistant to 300ºCelsius, resists exposure to most acids and chemicals

 

Sizes available:        5 – 15, including half sizes 

 

GET YOUR SIZE RIGHT!

The Sizing On These Oliver Boots Is UK Men’s (AU/UK Sizing)

PLEASE SEE THE SIZING SECTION FOR US & EU COMPARISONS

 

The Boot Warehouse is an authorised distributor of Oliver Boots. All Oliver Safety Boots are manufactured to Australian Safety Standards (AS/NZS 2210.3:2009), and Oliver offer extensive manufacturer warranty on all their footwear. We are happy to exchange and refund where applicable to ensure your satisfaction. See our ‘Returns & Exchanges’ section for additional information.

The Boot Warehouse has a 30-day return policy.  
To create a new return, begin by calling us on 02 9524 6188 and request a pre-paid return label. This will cost $16.95 or $20 for two pairs and can be paid over the phone. You can also request a return by emailing admin@tbwsafety.com.au. We will reply with a PayPal link in which you can deposit the amount for your return.

This payment covers the cost of the postage of your item back to our warehouse and the cost of your new item back out to you or a refund in full. This saves you from having to pay general public postage rates to return your item. You will then receive your label via email to print and attach to your return. The cost of returning a pair from New Zealand is $30.00.

To complete your return please follow the following steps:

1. Have your order number handy and phone us on 02 9524 6188 and request a pre-paid label and pay the $16.95 over the phone. You will then receive your label via email shortly after.
2. Print the returns form or use the one included with your delivery and include it in the box – Click to print the RETURNS FORM
3. Ensure your item for return is in its original box which is packed back into a satchel to protect the box and item on its return
4. Print and attach the pre-paid label onto the satchel
5. Drop the parcel off to your nearest Australia Post office
6. Keep an eye on your e-mails for return updates

Important 

Please ensure your item for return is in its original box or be sure that the original tags on the clothing have not been removed from your clothing. Your return will also only be accepted if you place your return back into the reusable satchel your item arrived in or any packaging, for example, wrapping paper or newspaper. Ensure that your return label is then placed onto the packaging and not directly onto the shoebox. This is an important step as we need to re-sell the style you are returning. If you do not complete this step, we are unable to accept and process your return.

If you paid by Pay Pal, they offer a partial refund of the return cost. For instructions on how to take advantage please click here.

Your parcel will take up to 4 days to be delivered back to our warehouse. If you have completed each of the above steps your return will be processed, dispatched or refunded if requested on the same day it is received here in the warehouse.

Have any further questions? 
Please email us at returns@tbwsafety.com.au or phone us on 02 9524 6188

International returns (excluding NZ):
All postage and handling costs will be incurred by the customer. If you return your item for a change of size, you must pay for the re-postage of your new item. The re-postage cost will be the same as what you originally paid and can be found on your invoice. If you are returning your item for a refund, please know you will be refunded the cost of your item only, excluding any postage originally paid. Please CLICK HERE to print a copy of our international (excluding NZ) return form.   

CLAIMS FOR MANUFACTURER FAULTS

All of the footwear we sell is new to stock and covered by the manufactures 6-month warranty. If you find yourself in the unfortunate situation of needing to make a claim for a quality issue please follow these steps;

1. Check your item is still within its warranty time frame of 6 months. 
2. Email our warranty department at returns@tbwsafety.com.au with your order number, a description, and 2 clear images of the fault. If any further information or images are required, we will let you know via reply.
3. We will confirm we have received your email and advise you of the outcome. We will sometimes forward the images to the manufacturer for their advice. 

If the manufacturer agrees that your boot contains a manufacturing fault, we will issue you with a new pair straight away at our cost and provide you with a returns label which is pre-paid to return your faulty footwear. 

In some cases, the boot will be required to be returned for further inspection before a decision can be made. Our returns department will advise you if this is required. Under no circumstances will we replace a faulty item with a size change. WARRANTY RETURNS FORM

30-DAY COMFORT GUARANTEE

To return a pair under a comfort guarantee, please follow the following steps. Please note, your item will need to be returned at your own cost.

1) The brands that offer a 30-day comfort guarantee are Oliver, Blundstone and Steel Blue.
2) Your purchase must be returned within 30 days from the date of receipt
3) Please include your receipt and a completed copy of the 30 DAY COMFORT GUARANTEE FORM
4) Return the package to the following address at your own cost

The Boot Warehouse 
Unit 20, 20-28 Kareena Rd 
Miranda NSW 2228

Under no circumstances will we replace a 30-day comfort guarantee return for a change of size. In most cases, a refund will be offered, or a change of style can be discussed as an option.

PRE ORDER ITEMS

The Boot Warehouse does not accept returns on pre-order items. 
Customers should only purchase this item if they have previously owned a pair and know their size.

Oliver Pull-On Firefighter Boots

Structural firefighter boot. Water resistant and flame retardant leather. Australian ‘3m’ flame resistant high visibility reflective tape. Wide profile ‘natureform’ type 1 non-metallic composite toe cap. Qflex zero non-metallic penetration protection insole. Electrical hazard (eh) protection. Reduces danger of accidental contact with live electrical circuits in accordance with astm f2413-05. Heavy duty dual density nitrile rubber sole. Heat resistant to 300ºcelsius. resists exposure to most acids and chemicals. Poronï® xrdï™ – extreme ankle protection. Comfort cushion pu/poron impact absorption system – reduces leg and lower back fatigue. Fully lined with sympatex waterproof liner and membrane. Heavy duty nomex stitching and flame proof laces. Tectuff toe bumper protection SIZES: 3 to 15 (half 6.5 to 10.5) AUS

 

Product Features

–  COMFORTcushion PU/PORON Impact Absorption System – reduces leg and lower back fatigue

–  Heat Resistant and Flame Retardant Full Grain Leather

–  Fully Lined with SYMPATEX Waterproof Liner and Membrane

–  Meets AS/NZS4821 Firefighting Footwear Standard

–  Water Resistant and Flame Retardant Leather

–  Australian ‘3M’ Flame Resistant High Visibility Reflective Tape.

–  Wide Profile NATUREform Type 1 Non-Metallic Composite Toe Cap

–  PORON® XRD™ EXTREME IMPACT PROTECTION Metatarsal Guard

–  QFlex Zero Non-Metallic Penetration Protection Insole -Heavy Duty Dual Density Nitrile Rubber Sole, Heat resistant to 300ºCelsius, resists exposure to most acids and chemicals

 

Sizes available:        5 – 15, including half sizes 

 

GET YOUR SIZE RIGHT!

The Sizing On These Oliver Boots Is UK Men’s (AU/UK Sizing)

PLEASE SEE THE SIZING SECTION FOR US & EU COMPARISONS

 

The Boot Warehouse is an authorised distributor of Oliver Boots. All Oliver Safety Boots are manufactured to Australian Safety Standards (AS/NZS 2210.3:2009), and Oliver offer extensive manufacturer warranty on all their footwear. We are happy to exchange and refund where applicable to ensure your satisfaction. See our ‘Returns & Exchanges’ section for additional information.

Weight 3.0 kg
Dimensions 44 × 38 × 13 cm
Size

5 (AU/UK) / 6 (US), 6 (AU/UK) / 7 (US), 6.5 (AU/UK) / 7.5 (US), 7 (AU/UK) / 8 (US), 7.5 (AU/UK) / 8.5 (US), 8 (AU/UK) / 9 (US), 8.5 (AU/UK) / 9.5 (US), 9 (AU/UK) / 10 (US), 9.5 (AU/UK) / 10.5 (US), 10 (AU/UK) / 11 (US), 10.5 (AU/UK) / 11.5 (US), 11 (AU/UK) / 12 (US), 12 (AU/UK) / 13 (US), 13 (AU/UK) / 14 (US), 14 (AU/UK) / 15( US)

Free Gifts

Cotton Socks

Colour

Department

Men

Style

Fire Fighters Boots, High Leg Boots

Type

Boot

Features

Cushioned, Composite Toe, Flame Retardant Leather, Fully Lined, Slip Resistant, Waterproof

Upper Material

Full Grain Leather

MPN

Does Not Apply

Closure

slip on

Brand

Oliver

Material

Full Grain Leather

Shoe Type

Work Boots

Fastening

Slip On

Condition

New with box

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.