690BLWC – 6INCH BLACK 100% WATERPROOF COMPOSITE TOE BOOT

Since its release in 2009, WIDE LOAD® has become the benchmark in wide fitting extra depth safety footwear. Designed and developed in Sydney Australia in collaboration with leading orthopaedic/custom made shoemakers and Podiatrists*, the WIDE LOAD® last is based on 6E fitting profile with an additional 8mm of volume of forefoot girth.
Wide Load boots are designed and manufactured with a wide profile steel/composite cap that has been specifically designed to meet the needs of those with wide feet, it is 12-15mm wider and 5mm higher than the industry ‘standard’, thus facilitating the fitting of custom-made orthotics and more importantly, challenging feet.
The anatomically designed forefoot provides an additional 15% “footprint” compared to the industry standard. This additional surface area combined with the self-cleaning cleat design outsole provides maximum stability and enhanced slip resistance. Walking can increase ground forces by up to 3 times body weight. The Wide Load bevelled heel strike and heel cushion zone helps reduce shock and lesson the effects of these forces on the body.
The new airport friendly composite cap range is 10% (150 grams) lighter than its steel cap counterpart and incorporates high performance ‘nylon6’ non-metallic lace hardware. The cap provides less transmission of hot and cold while achieving “steel-like” safety for impact and compression. The cap meets all safety standards without compromising comfort.

Wide fit guarantee:
We are certain that Wide Load boots will be wide enough for you; if they are not, we will cover the cost of returning your boots for a full refund.
Please note that the footwear must be unworn to make a claim. Please be sure to try your footwear on a clean carpeted area before wearing them out of the house.

Product features;

– Deep, wide fitting composite toe cap (200J) (6E)

– 100% waterproof and breathable internal lining

– Waterproof leather

– Nitrile rubber sole

– TPU scuff cap

– PU memory foam cushion insole

– Penetration resistant insole

– Coats NylBond stitching

– Airport friendly – Metal Free

Detailed description;

– 6E Extra Wide Composite Metal Free Safety Cap
15mm wider and 8mm higher than standard Composite Cap

– 100% Waterproof lining
A world renounded material ( SYMPA TEXR) completly lines this product. This lining has millions on tiny holes per CM which allows only air to flow thoruigh keeping the water out – Garenteed. Unline other waterproof footwear we have also incldued waterproof leather to enance this feature

– Penetration Resistant
Flexable ceramic layer which stops sharp and dangerous items from puncturing the sole

– Multi- Fit Insole System
Interchangeable 3mm EVA inserts provide an adjustable fitting included in every box

-Orthotic Friendly
The Removable footbed is easily substituted for prescription orthotics creating maximum room.

-Lightweight Phylon Midsole
Provides superior cushioning and support. Also offers advanced shock-absorbency reducing foot fatigue.

-Fully Lined
Soft Mesh tri-Layer breathable lining with superior wicking and thermal properties.

-Padded Collar & Tongue
Super-soft “ester” foam collar/tongue padding for added comfort and support

-Removable Footbed
Soft memory foam top layer with built-in arch support & heel cup for enhanced cushioning. With genuine BK mesh 260gsm top cover with Agion® antibacterial treatment to reduce foot odour.

-Fibre Glass Shank
To enhance torsional support and midfoot stability. Greatly assists in reducing leg and foot fatigue

– Rubber outsole
Heat Resistance to 300oC
Anatomically designed forefoot for maximum grip, 15% more surface area than traditional work boots.
Self-cleaning cleat sole design
Slip-resistant sole
Premium resistance to oil, mild acids, alkalis and animal fats

– Leather Upper
Waterproof 2.2mm premium full-grain leather

-Certified to:
AS 2210.3.2019 CLASS 1 S3, P, SRC, HRO, FO –  AUSTRALIAN, NEW ZEALAND  STANDARD

Size

Sizes 6 – 15 UK Men’s (7-16US)

Due to the width of Wide Load boots, there are no half sizes

The Boot Warehouse has a 30-day return policy.  
To create a new return, begin by calling us on 02 9524 6188 and request a pre-paid return label. This will cost $16.95 or $20 for two pairs and can be paid over the phone. You can also request a return by emailing admin@tbwsafety.com.au. We will reply with a PayPal link in which you can deposit the amount for your return.

This payment covers the cost of the postage of your item back to our warehouse and the cost of your new item back out to you or a refund in full. This saves you from having to pay general public postage rates to return your item. You will then receive your label via email to print and attach to your return. The cost of returning a pair from New Zealand is $30.00.

To complete your return please follow the following steps:

1. Have your order number handy and phone us on 02 9524 6188 and request a pre-paid label and pay the $16.95 over the phone. You will then receive your label via email shortly after.
2. Print the returns form or use the one included with your delivery and include it in the box – Click to print the RETURNS FORM
3. Ensure your item for return is in its original box which is packed back into a satchel to protect the box and item on its return
4. Print and attach the pre-paid label onto the satchel
5. Drop the parcel off to your nearest Australia Post office
6. Keep an eye on your e-mails for return updates

Important 

Please ensure your item for return is in its original box or be sure that the original tags on the clothing have not been removed from your clothing. Your return will also only be accepted if you place your return back into the reusable satchel your item arrived in or any packaging, for example, wrapping paper or newspaper. Ensure that your return label is then placed onto the packaging and not directly onto the shoebox. This is an important step as we need to re-sell the style you are returning. If you do not complete this step, we are unable to accept and process your return.

If you paid by Pay Pal, they offer a partial refund of the return cost. For instructions on how to take advantage please click here.

Your parcel will take up to 4 days to be delivered back to our warehouse. If you have completed each of the above steps your return will be processed, dispatched or refunded if requested on the same day it is received here in the warehouse.

Have any further questions? 
Please email us at returns@tbwsafety.com.au or phone us on 02 9524 6188

International returns (excluding NZ):
All postage and handling costs will be incurred by the customer. If you return your item for a change of size, you must pay for the re-postage of your new item. The re-postage cost will be the same as what you originally paid and can be found on your invoice. If you are returning your item for a refund, please know you will be refunded the cost of your item only, excluding any postage originally paid. Please CLICK HERE to print a copy of our international (excluding NZ) return form.   

CLAIMS FOR MANUFACTURER FAULTS

All of the footwear we sell is new to stock and covered by the manufactures 6-month warranty. If you find yourself in the unfortunate situation of needing to make a claim for a quality issue please follow these steps;

1. Check your item is still within its warranty time frame of 6 months. 
2. Email our warranty department at returns@tbwsafety.com.au with your order number, a description, and 2 clear images of the fault. If any further information or images are required, we will let you know via reply.
3. We will confirm we have received your email and advise you of the outcome. We will sometimes forward the images to the manufacturer for their advice. 

If the manufacturer agrees that your boot contains a manufacturing fault, we will issue you with a new pair straight away at our cost and provide you with a returns label which is pre-paid to return your faulty footwear. 

In some cases, the boot will be required to be returned for further inspection before a decision can be made. Our returns department will advise you if this is required. Under no circumstances will we replace a faulty item with a size change. WARRANTY RETURNS FORM

30-DAY COMFORT GUARANTEE

To return a pair under a comfort guarantee, please follow the following steps. Please note, your item will need to be returned at your own cost.

1) The brands that offer a 30-day comfort guarantee are Oliver, Blundstone and Steel Blue.
2) Your purchase must be returned within 30 days from the date of receipt
3) Please include your receipt and a completed copy of the 30 DAY COMFORT GUARANTEE FORM
4) Return the package to the following address at your own cost

The Boot Warehouse 
Unit 20, 20-28 Kareena Rd 
Miranda NSW 2228

Under no circumstances will we replace a 30-day comfort guarantee return for a change of size. In most cases, a refund will be offered, or a change of style can be discussed as an option.

PRE ORDER ITEMS

The Boot Warehouse does not accept returns on pre-order items. 
Customers should only purchase this item if they have previously owned a pair and know their size.

Wide Load 690BLWC – 6E Extra Wide, Black, 100% Waterproof Composite Safety Boot

$259.90$259.95
Clear
Compare

690BLWC – 6INCH BLACK 100% WATERPROOF COMPOSITE TOE BOOT

Since its release in 2009, WIDE LOAD® has become the benchmark in wide fitting extra depth safety footwear. Designed and developed in Sydney Australia in collaboration with leading orthopaedic/custom made shoemakers and Podiatrists*, the WIDE LOAD® last is based on 6E fitting profile with an additional 8mm of volume of forefoot girth.
Wide Load boots are designed and manufactured with a wide profile steel/composite cap that has been specifically designed to meet the needs of those with wide feet, it is 12-15mm wider and 5mm higher than the industry ‘standard’, thus facilitating the fitting of custom-made orthotics and more importantly, challenging feet.
The anatomically designed forefoot provides an additional 15% “footprint” compared to the industry standard. This additional surface area combined with the self-cleaning cleat design outsole provides maximum stability and enhanced slip resistance. Walking can increase ground forces by up to 3 times body weight. The Wide Load bevelled heel strike and heel cushion zone helps reduce shock and lesson the effects of these forces on the body.
The new airport friendly composite cap range is 10% (150 grams) lighter than its steel cap counterpart and incorporates high performance ‘nylon6’ non-metallic lace hardware. The cap provides less transmission of hot and cold while achieving “steel-like” safety for impact and compression. The cap meets all safety standards without compromising comfort.

Wide fit guarantee:
We are certain that Wide Load boots will be wide enough for you; if they are not, we will cover the cost of returning your boots for a full refund.
Please note that the footwear must be unworn to make a claim. Please be sure to try your footwear on a clean carpeted area before wearing them out of the house.

Product features;

– Deep, wide fitting composite toe cap (200J) (6E)

– 100% waterproof and breathable internal lining

– Waterproof leather

– Nitrile rubber sole

– TPU scuff cap

– PU memory foam cushion insole

– Penetration resistant insole

– Coats NylBond stitching

– Airport friendly – Metal Free

Detailed description;

– 6E Extra Wide Composite Metal Free Safety Cap
15mm wider and 8mm higher than standard Composite Cap

– 100% Waterproof lining
A world renounded material ( SYMPA TEXR) completly lines this product. This lining has millions on tiny holes per CM which allows only air to flow thoruigh keeping the water out – Garenteed. Unline other waterproof footwear we have also incldued waterproof leather to enance this feature

– Penetration Resistant
Flexable ceramic layer which stops sharp and dangerous items from puncturing the sole

– Multi- Fit Insole System
Interchangeable 3mm EVA inserts provide an adjustable fitting included in every box

-Orthotic Friendly
The Removable footbed is easily substituted for prescription orthotics creating maximum room.

-Lightweight Phylon Midsole
Provides superior cushioning and support. Also offers advanced shock-absorbency reducing foot fatigue.

-Fully Lined
Soft Mesh tri-Layer breathable lining with superior wicking and thermal properties.

-Padded Collar & Tongue
Super-soft “ester” foam collar/tongue padding for added comfort and support

-Removable Footbed
Soft memory foam top layer with built-in arch support & heel cup for enhanced cushioning. With genuine BK mesh 260gsm top cover with Agion® antibacterial treatment to reduce foot odour.

-Fibre Glass Shank
To enhance torsional support and midfoot stability. Greatly assists in reducing leg and foot fatigue

– Rubber outsole
Heat Resistance to 300oC
Anatomically designed forefoot for maximum grip, 15% more surface area than traditional work boots.
Self-cleaning cleat sole design
Slip-resistant sole
Premium resistance to oil, mild acids, alkalis and animal fats

– Leather Upper
Waterproof 2.2mm premium full-grain leather

-Certified to:
AS 2210.3.2019 CLASS 1 S3, P, SRC, HRO, FO –  AUSTRALIAN, NEW ZEALAND  STANDARD

Size

Sizes 6 – 15 UK Men’s (7-16US)

Due to the width of Wide Load boots, there are no half sizes

The Boot Warehouse has a 30-day return policy.  
To create a new return, begin by calling us on 02 9524 6188 and request a pre-paid return label. This will cost $16.95 or $20 for two pairs and can be paid over the phone. You can also request a return by emailing admin@tbwsafety.com.au. We will reply with a PayPal link in which you can deposit the amount for your return.

This payment covers the cost of the postage of your item back to our warehouse and the cost of your new item back out to you or a refund in full. This saves you from having to pay general public postage rates to return your item. You will then receive your label via email to print and attach to your return. The cost of returning a pair from New Zealand is $30.00.

To complete your return please follow the following steps:

1. Have your order number handy and phone us on 02 9524 6188 and request a pre-paid label and pay the $16.95 over the phone. You will then receive your label via email shortly after.
2. Print the returns form or use the one included with your delivery and include it in the box – Click to print the RETURNS FORM
3. Ensure your item for return is in its original box which is packed back into a satchel to protect the box and item on its return
4. Print and attach the pre-paid label onto the satchel
5. Drop the parcel off to your nearest Australia Post office
6. Keep an eye on your e-mails for return updates

Important 

Please ensure your item for return is in its original box or be sure that the original tags on the clothing have not been removed from your clothing. Your return will also only be accepted if you place your return back into the reusable satchel your item arrived in or any packaging, for example, wrapping paper or newspaper. Ensure that your return label is then placed onto the packaging and not directly onto the shoebox. This is an important step as we need to re-sell the style you are returning. If you do not complete this step, we are unable to accept and process your return.

If you paid by Pay Pal, they offer a partial refund of the return cost. For instructions on how to take advantage please click here.

Your parcel will take up to 4 days to be delivered back to our warehouse. If you have completed each of the above steps your return will be processed, dispatched or refunded if requested on the same day it is received here in the warehouse.

Have any further questions? 
Please email us at returns@tbwsafety.com.au or phone us on 02 9524 6188

International returns (excluding NZ):
All postage and handling costs will be incurred by the customer. If you return your item for a change of size, you must pay for the re-postage of your new item. The re-postage cost will be the same as what you originally paid and can be found on your invoice. If you are returning your item for a refund, please know you will be refunded the cost of your item only, excluding any postage originally paid. Please CLICK HERE to print a copy of our international (excluding NZ) return form.   

CLAIMS FOR MANUFACTURER FAULTS

All of the footwear we sell is new to stock and covered by the manufactures 6-month warranty. If you find yourself in the unfortunate situation of needing to make a claim for a quality issue please follow these steps;

1. Check your item is still within its warranty time frame of 6 months. 
2. Email our warranty department at returns@tbwsafety.com.au with your order number, a description, and 2 clear images of the fault. If any further information or images are required, we will let you know via reply.
3. We will confirm we have received your email and advise you of the outcome. We will sometimes forward the images to the manufacturer for their advice. 

If the manufacturer agrees that your boot contains a manufacturing fault, we will issue you with a new pair straight away at our cost and provide you with a returns label which is pre-paid to return your faulty footwear. 

In some cases, the boot will be required to be returned for further inspection before a decision can be made. Our returns department will advise you if this is required. Under no circumstances will we replace a faulty item with a size change. WARRANTY RETURNS FORM

30-DAY COMFORT GUARANTEE

To return a pair under a comfort guarantee, please follow the following steps. Please note, your item will need to be returned at your own cost.

1) The brands that offer a 30-day comfort guarantee are Oliver, Blundstone and Steel Blue.
2) Your purchase must be returned within 30 days from the date of receipt
3) Please include your receipt and a completed copy of the 30 DAY COMFORT GUARANTEE FORM
4) Return the package to the following address at your own cost

The Boot Warehouse 
Unit 20, 20-28 Kareena Rd 
Miranda NSW 2228

Under no circumstances will we replace a 30-day comfort guarantee return for a change of size. In most cases, a refund will be offered, or a change of style can be discussed as an option.

PRE ORDER ITEMS

The Boot Warehouse does not accept returns on pre-order items. 
Customers should only purchase this item if they have previously owned a pair and know their size.

690BLWC – 6INCH BLACK 100% WATERPROOF COMPOSITE TOE BOOT

Since its release in 2009, WIDE LOAD® has become the benchmark in wide fitting extra depth safety footwear. Designed and developed in Sydney Australia in collaboration with leading orthopaedic/custom made shoemakers and Podiatrists*, the WIDE LOAD® last is based on 6E fitting profile with an additional 8mm of volume of forefoot girth.
Wide Load boots are designed and manufactured with a wide profile steel/composite cap that has been specifically designed to meet the needs of those with wide feet, it is 12-15mm wider and 5mm higher than the industry ‘standard’, thus facilitating the fitting of custom-made orthotics and more importantly, challenging feet.
The anatomically designed forefoot provides an additional 15% “footprint” compared to the industry standard. This additional surface area combined with the self-cleaning cleat design outsole provides maximum stability and enhanced slip resistance. Walking can increase ground forces by up to 3 times body weight. The Wide Load bevelled heel strike and heel cushion zone helps reduce shock and lesson the effects of these forces on the body.
The new airport friendly composite cap range is 10% (150 grams) lighter than its steel cap counterpart and incorporates high performance ‘nylon6’ non-metallic lace hardware. The cap provides less transmission of hot and cold while achieving “steel-like” safety for impact and compression. The cap meets all safety standards without compromising comfort.

Wide fit guarantee:
We are certain that Wide Load boots will be wide enough for you; if they are not, we will cover the cost of returning your boots for a full refund.
Please note that the footwear must be unworn to make a claim. Please be sure to try your footwear on a clean carpeted area before wearing them out of the house.

Product features;

– Deep, wide fitting composite toe cap (200J) (6E)

– 100% waterproof and breathable internal lining

– Waterproof leather

– Nitrile rubber sole

– TPU scuff cap

– PU memory foam cushion insole

– Penetration resistant insole

– Coats NylBond stitching

– Airport friendly – Metal Free

Detailed description;

– 6E Extra Wide Composite Metal Free Safety Cap
15mm wider and 8mm higher than standard Composite Cap

– 100% Waterproof lining
A world renounded material ( SYMPA TEXR) completly lines this product. This lining has millions on tiny holes per CM which allows only air to flow thoruigh keeping the water out – Garenteed. Unline other waterproof footwear we have also incldued waterproof leather to enance this feature

– Penetration Resistant
Flexable ceramic layer which stops sharp and dangerous items from puncturing the sole

– Multi- Fit Insole System
Interchangeable 3mm EVA inserts provide an adjustable fitting included in every box

-Orthotic Friendly
The Removable footbed is easily substituted for prescription orthotics creating maximum room.

-Lightweight Phylon Midsole
Provides superior cushioning and support. Also offers advanced shock-absorbency reducing foot fatigue.

-Fully Lined
Soft Mesh tri-Layer breathable lining with superior wicking and thermal properties.

-Padded Collar & Tongue
Super-soft “ester” foam collar/tongue padding for added comfort and support

-Removable Footbed
Soft memory foam top layer with built-in arch support & heel cup for enhanced cushioning. With genuine BK mesh 260gsm top cover with Agion® antibacterial treatment to reduce foot odour.

-Fibre Glass Shank
To enhance torsional support and midfoot stability. Greatly assists in reducing leg and foot fatigue

– Rubber outsole
Heat Resistance to 300oC
Anatomically designed forefoot for maximum grip, 15% more surface area than traditional work boots.
Self-cleaning cleat sole design
Slip-resistant sole
Premium resistance to oil, mild acids, alkalis and animal fats

– Leather Upper
Waterproof 2.2mm premium full-grain leather

-Certified to:
AS 2210.3.2019 CLASS 1 S3, P, SRC, HRO, FO –  AUSTRALIAN, NEW ZEALAND  STANDARD

Size

Sizes 6 – 15 UK Men’s (7-16US)

Due to the width of Wide Load boots, there are no half sizes

Weight 2.500 kg
Dimensions 38 × 32 × 13 cm
Size

6 (AU/UK) / 7 (US), 7 (AU/UK) / 8 (US), 8 (AU/UK) / 9 (US), 9 (AU/UK) / 10 (US), 10 (AU/UK) / 11 (US), 11 (AU/UK) / 12 (US), 12 (AU/UK) / 13 (US), 13 (AU/UK) / 14 (US), 14 (AU/UK) / 15 (US), 15 (AU/UK) / 16 (US)

Brand

Wide Load

Fit

6E

Sole

Rubber

Safety Standards

Penetration resistant

Waterproof

YES

Model

690BLWC

MPN

690BLWC

Safety Toe

Composite

Shoe Width

Extra Wide: (EE+)

Metal Free

YES

Colour

Condition

New with tags

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.